Replacement Parts And Equipment; Disposal - Stihl SGA 85 Instruction Manual

24 Replacement Parts and Equipment

Number of cells and stored energy accord‐
ing to cell manufacturer's specification.
Usable energy will be less.
STIHL products must not be disposed of in
the household trash, but only in accord‐
ance with local, state and federal laws and
regulations and as provided in this manual,
25.1.
The RBRC seal indicates that STIHL has
prepaid for battery recycling
23.4 Ambient Temperature Limits
WARNING
■ Extreme temperatures can damage the battery
and may also cause it to generate heat, rup‐
ture, leak, ignite or explode, resulting in severe
or fatal personal injury or property damage.
Never charge, use or store the battery outside
the ambient temperature limits specified
below.
► Do not charge or use the battery below -
4 °F (- 20 °C) or above 122 °F (50 °C).
► Do not store the battery below - 4 °F (-
20 °C) or above 158 °F (70 °C).
► Do not use the sprayer below 32 °F (0 °C)
or above 122 °F (50 °C).
► Do not store the sprayer below 32 °F (0 °C)
or above 158 °F (70 °C).
23.5 Ambient Temperature Recom‐
mendations
For optimum performance, observe the following
ambient temperature ranges for the sprayer and
the battery:
– Sprayer
– Use: 32 °F to 104 °F (0 °C to 40 °C)
– Storage: 32 °F to 122 °F (0 °C to 50 °C)
– Battery
– Charging: 41 °F to 104 °F (5 °C to 40 °C)
– Use: 14 °F to 104 °F (- 10 °C to 40 °C)
– Storage: - 4 °F to 122 °F (- 20 °C to 50 °C)
Charging, using or storing the battery outside the
recommended ambient temperature ranges may
reduce performance.
If the battery became damp or wet during opera‐
tion, allow it to dry at least 48 hours at tempera‐
tures between 59 °F (15 °C) and 122 °F (50 °C)
and relative humidity below 70 % before charg‐
ing or storing. Higher humidity can extend the
drying time.
0458-600-8221-B
23.6 Engineering Improvements
STIHL's philosophy is to continually improve all
of its products. As a result, engineering changes
and improvements are made from time to time.
Therefore, some changes, modifications and
improvements may not be covered in this man‐
ual. If the operating characteristics or the appear‐
ance of your machine differs from those descri‐
bed in this manual, please contact your STIHL
dealer or the STIHL distributor in your area for
assistance.
23.7 EMC Compliance Statement
for Power Tool and Charger
This Class B digital apparatus complies with
Canadian ICES‑003.
24 Replacement Parts and
Equipment
24.1 Genuine STIHL Replacement
Parts
STIHL recommends the use of genuine STIHL
replacement parts. Genuine STIHL parts can be
identified by the STIHL part number, the
logo and, in some cases, by the STIHL parts
symbol . The symbol may appear alone on
small parts.
24.2 Main Replacement Parts
– Nozzle: 4255 700 6302
– Filter in the spray gun: 4255 502 0700

25 Disposal

25.1 Disposal of the Power Tool
STIHL products must not be thrown in household
trash or disposed of except as outlined in this
manual.
► Take the power tool, accessories and packag‐
ing to an approved disposal site for environ‐
mentally friendly recycling.
► Contact your authorized STIHL servicing
dealer for the latest information on disposal
and recycling.
English
25