After Spraying - Stihl SG 10 Instruction Manual

English / USA
Spraying
1
: Press the lever (1) down.
: When the spray pressure begins to
drop, move the pump shaft up and
down uniformly – 15 strokes are
necessary to restore full pressure.
10

After Spraying

: Drain the tank in a well-ventilated
location.
: Dispose of spray solution in
accordance with applicable
ordinances and environmental
requirements – follow instructions of
the chemical manufacturer.
: Rinse the tank with clean water.
: Fill the tank with clean water, pump
and spray until the tank is empty
and no longer under pressure – do
not store the sprayer with the tank
under pressure or filled with spray
solution.
: Lubricate the pump piston with
grease periodically.
SG 10