Storing the Machine........10 Inspection and Maintenance by User..10 Engineering improvements Maintenance and Care......11 Main Parts..........12 STIHL's philosophy is to continually improve all Specifications..........12 of its products. For this reason we may modify Troubleshooting........13 the design, engineering and appearance of our Maintenance and Repairs......
Page 3
Clothing must be snug-fitting but allow complete Only use parts and accessories that are explicitly freedom of movement. approved for this tool by STIHL or are technically identical. If you have any questions in this Immediately change work clothes contaminated respect, consult a servicing dealer.
Page 4
– since this may increase the risk of personal sudden low pressure in the system may cause injury. STIHL excludes all liability for personal the solution to be sucked back into the water injury and damage to property caused while supply.
Page 5
For emergencies: Practice quickly opening the fastener on the waist belt (SG 71 only), loosen‐ STIHL recommends that you have servicing and ing the shoulder straps and setting down the repair work carried out exclusively by an author‐...
If you have any questions in this respect, consult a servicing dealer. STIHL recommends the use of genuine STIHL replacement parts. They are specifically designed to match your model and meet your performance requirements.
4 Harness English ► Adjust the harness straps so that the back‐ plate fits snugly and securely against your back Adjusting the Height of Har‐ ness Straps The harness straps can be adjusted to suit your physique. ► Swing the lever (2) upwards. ►...
English 5 Controls D Squeeze the hooks to open the quick-release fastener Controls Make yourself familiar with how the controls function before using your sprayer for the first time. Lever Pressurizing the tank ► Operate the pump lever slowly and steadily with the gun closed –...
6 Filling the Container English ► Remove the cap from the tank. There are three measuring cups in the cap. They can be used to prepare the plant protection solu‐ tion. 5 ml (0.2 fl.oz) 10 ml (0.3 fl.oz) 25 ml (0.8 fl.oz) Spray Gun Unlocking / locking spray gun ►...
English 8 After Spraying Working pressures / spray rates – see "Specifi‐ Installing cations". After Spraying ► Empty the container in a well ventilated loca‐ tion. ► Rinse the container with clean water. ► Fill the container with clean water. ►...
11 Maintenance and Care English 10.4 Cleaning the filter ► Unscrew the hollow-cone nozzle (1) with swirl insert (2) ► Unscrew the handle (1) from the spray gun ► Rinse out all parts under running water and and take out the filter (2) then reassemble ►...
English 12 Main Parts The following intervals apply to normal operating conditions only. If your daily working times are lon‐ ger, shorten the specified intervals accordingly. O-ring in container's cap Visual inspection (condition, leaks) Solution container, hose Drain system, wand Clean Nozzle Clean...
Cleaning the nozzle STIHL recommends STIHL servicing dealers 15 Maintenance and Repairs STIHL parts symbol K (the symbol may appear alone on small parts). Users of this machine may only carry out the maintenance and service work described in this 16 Disposal user manual.
2008 and has been manufactured in compliance formity with the following standards in the versions valid on the date of production: ANDREAS STIHL AG & Co. KG Badstr. 115 DIN EN ISO 19932‑1: 2013, D-71336 Waiblingen DIN EN ISO 19932‑2: 2014...
Page 15
18 UKCA Declaration of Conformity English 0458-597-0121-C...