After Finishing Work; Transporting; Transporting The Sprayer; Storing - Stihl SGA 85 Instruction Manual

13 After Finishing Work

Setting the spot jet (B)
► Turn the nozzle clockwise one full turn.
13 After Finishing Work
13.1 After Finishing Work
► Switch off the sprayer and remove the battery.
► Pull the trigger.
Pressure is relieved.
► Drain the tank in a well ventilated location.
► Rinse the tank with clean water.
► Fill the tank with clean water.
► Fit the battery and switch on the sprayer.
► Pull the trigger.
Continue spraying until the water has been completely
flushed out of the hose, spray gun and wand.
► Switch off the sprayer and remove the battery.
► Pull the trigger.
Pressure is relieved.
► Remove and clean the nozzle and spray wand.
► Remove the spray gun and allow remaining water to drain
away.
► Clean the sprayer.
► Clean the filter.
► Clean the nozzle.
► Allow sprayer to dry.

14 Transporting

14.1 Transporting the Sprayer

► Switch off the sprayer, push the retaining latch to position
and remove the battery.
► Empty the container.
0458-600-9821-A
► Carry the sprayer by the transport handle or on your back.
► Transporting the machine in a vehicle: Secure the sprayer
standing to prevent turnover and movement.

15 Storing

15.1 Storing the Sprayer

► Switch off the sprayer and remove the battery.
► Check the following points when storing the sprayer:
– Sprayer is out of the reach of children.
– Sprayer has been rinsed with clean water.
– Sprayer is clean and dry.
– Sprayer is at a temperature above 0°C.
– Sprayer is protected from sunlight.
English
1
1
49