Table of Contents
Advertisement
Maintenance Task
Repair diaphragm and valves
Exchange pump
Replace pump
Exhaust muffler
Diaphragm Key*
LACO Technologies
Part Number
LMK-TVT-6
CAUTION: Dry pumps do not typically have short term
maintenance concerns but can potentially require major long-term
repair if two-year maintenance is not performed.
Pump Maintenance and Repair Options
MVP030 Repair Options
*Utilize to remove/install new diaphragms.
Diaphragm Inspection
•
Unscrew banjo bolt using an open-end wrench. loosen connecting hose
only from the top (see picture below).
•
Unscrew cylinder head screws (six screws) at the pump head and remove
housing cover; be mindful of the position of the valve seals. If necessary,
take a picture of the original position of the valve seals.
•
If the valve seals stick to the housing cover, carefully loosen the seals.
Otherwise, remove the valve seal from the head covers.
•
Replace damaged valve seals.
•
Remove head cover.
•
Either clean all parts and inspect for wear or install new diaphragm.
ATLAS Operations and Maintenance Manual
Description
UNO 6 oil drain-back assembly
Part Number
LMK-TVTD-1 (Kit)
LS-TVTD-1 (Repair)
LS-TVTD-PEXC
LS-TVTD-PEXL
PFPKT01190
PFP0995942
PFP0995941
8 MAINTENANCE AND SPARE PARTS
Maintenance Interval
12000 h or 24 months
36000 h or 72 months
36000 h or 72 months
12000 h or 24 months
Level Site
2
OS or LS
2-3
OS or LS
2-3
OS or LS
1
OS
63
Advertisement
Table of Contents
