Table of Contents
Advertisement
Equipment Description
The ATLAS controller is designed to be used as a part of a leak test system to control the
test process and provide an operator interface. In this configuration, it is dependent on
other components (TitanTest leak detector, tooling, etc.).
The ATLAS can also be used as a stand-alone controller for helium charge only
applications.
Refer to section 5 for equipment connections and diagrams.
Storage Temperature
Operation Temperature
Max. relative humidity up to 31 °C (88 °F)
Max. relative humidity from 31 °C (88 °F)
to 35 °C (95 °F)
Use
Max. altitude above sea level
Noise level
Max Acceleration During Operation
Pollution
4.3.2
Feature
Controller Size
Mounting
Electrical
Control System
Communication
Air Requirements
Test Methods
Software Features
Customizable
• Configurations with an external part evac pump are rated at 1000 Watts and must be CE rated.
LACO Technologies
Storage and Usage Table
Storage and Usage Specifications Table
Mechanical Data Table
16" H x 16" W x 6" D
Bottom or Rear mount
90-250 VAC, 50/60 Hz, 500 Watts*, IEC C13 connection
Remote HMI Enclosure, 7.0" color touchscreen with start and
option buttons
Ethernet & USB
80-120 psig CDA
Hard Vac, He Charge Only, HATS, Accumulation, Sniff
Data-logging, recipe based (up to 99), remote serial control
Yes, process, hardware, and/or software
ATLAS Operations and Maintenance Manual
10 °C to 55 °C (14 °F to 131 °F)
10 °C to 35 °C (14 °F to 95 °F)
80 %
linearly decreasing from 80 % to 50 %
only indoors
2000 m a.s.l.
< 70 dB(A) (acc. to IEC standard)
1G (horizontal)
II (According to IEC 61010 / Part 1:
"Usually, only non-conducting
contamination may occur. However,
temporary conductivity caused by
condensation is permissible at times.")
Mechanical Specifications
4 EQUIPMENT DESCRIPTION
9
Advertisement
Table of Contents
