Table of Contents
Advertisement
Personnel qualifications
LACO Technologies
•
Allow only qualified service technicians to work with and on the device. The
qualified service technicians must have received training on the device.
•
Allow personnel in training to work with and on the device only under the
supervision of trained qualified service technicians.
•
Make sure that the authorized personnel have read and understood the
operating instructions and all other applicable documents, especially the
information regarding safety, maintenance, and repairs, before starting work.
•
Never perform maintenance on the system with the power on.
•
Read, observe, and follow the information in these operating and working
instructions created by the owner, especially the safety instructions and
warnings.
•
Carry out any work only based on the complete operating instructions.
•
If you have any questions regarding operation or maintenance that you cannot
find answers to in these instructions, then please contact LACO customer
Service.
o
Phone: 801-486-1004 | Toll Free: 800-465-1004
o
Email:
Technical Support:
•
When using this equipment, be sure to follow the safety procedures outlined
by your facility. These safety procedures should cover the two primary types
of hazard training: (1) equipment hazards and (2) facility-related hazards.
•
Never override or bypass any hardware or software interlocks.
•
All safeguard devices must be in place when equipment is in operation.
Operators, set-up operators, helpers or installation personnel should not alter,
remove, or disable safety equipment.
•
The ATLAS must be operated according to the specification in this manual,
otherwise the protective measures may be impaired.
ATLAS Operations and Maintenance Manual
techsupport@lacotech.com
2 SAFETY
3
Advertisement
Table of Contents
