Table of Contents
Advertisement
6 OPERATION
6.5.3.2.
6.5.3.3.
34
IO Check Screen
The IO check screen contains the current state of the digital inputs and outputs. It
also shows the reading of the analog inputs. The Enable IO check button can be
used to enable the digital output check. Note that pressing the button will disable
all the interlocks between valves, therefore, it should only be used when it is safe
to do so. After enabling the IO check, the user can press each of the squares to
turn on/ off the corresponding digital outputs. The square turns dark when the
output is in off state and turns bright when the output is in on state.
Manual Mode
The manual mode screen allows user to manually turn on/ off each of the valves in
the controller. Turn on the valve by pressing the red circle (representing a closed
valve) and turn off the valve by pressing the green circle (representing an opened
valve).
ATLAS Operations and Maintenance Manual
LACO Technologies
Advertisement
Table of Contents
