Chamber Vent Delay
Chamber N2 Purge
Chamber N2 Purge Time
6.5.2.6.
Sensor Range
Combined pressure
Part Pressure Unit
Part Evac Unit
Chamber Vacuum Unit
LACO Technologies
Delay time to allow the chamber vent valve to fully open after the output is turned
on.
Check the box if the test sequence includes a Nitrogen purge process in the
chamber.
The length of time for the chamber nitrogen purge process to run.
Transducer Configuration
Choose the sensor range for the pressure transducer connected to the
corresponding analog input device.
Select if the part pressure and part evac will be sensed with the same transducer
(absolute transducer).
Select the part pressure unit.
Select the part evac pressure unit.
Select the chamber vacuum pressure unit.
ATLAS Operations and Maintenance Manual
6 OPERATION
29