Table of Contents
Advertisement
6 OPERATION
•
Enable/Disable Test Results Printer – If purchased the ticket printer can be enabled.
This will print the results at the end of a test.
•
User Data – This allows the user to long and/or print custom data at the end of a test,
such as a serial number, operator, color, lot, etc. See following section for more
information.
•
Data Log Method – Select one of the 3 data logging methods to log data to the SD
card:
•
Data Log Interval – Sets the log interval to write data to the SD card during the data
stream options.
42
Data Log Settings Screen
This screen allows a user to export and import key data table csv files to a SD card
located in the controller, as well as a USB drive. Also, when a USB drive is
connected a user can export a csv file of all test summary files from the SD card to
the USB drive. An example of the test summary file structure is shown below.
Test Summary – Logs a single line test summary at the end of each test.
o
Manual Test Stream – Logs data at the interval while active.
o
Test Stream & Sum – Logs data during the test and then a summary at the end
o
of the cycle.
ATLAS Operations and Maintenance Manual
LACO Technologies
Advertisement
Table of Contents
