Calibration Settings Screens - LACO Technologies ATLAS Operation And Maintenance Manual

6 OPERATION
6.5.5.4.
Fixture Slide Enable
Weld Test Enable
Accelerated Test Mode
Quick Evac Time
Quick Fill Time
Air Purge Time
Sequence Delay Time
40
Miscellaneous
Check the box if a fixture slide is used.
Check the box to enable weld test.
Check the box to enable accelerated test mode.
Set the quick evac sequence run time.
Set the quick fill sequence run time.
Set the air purge sequence run time.
Set the delay time before running each sequence.

Calibration Settings Screens

NOTICE: Calibration Frequency
All Calibrations as-shipped settings will be recorded and provided in the
accompanying As-Shipped Parameter Summary.
ATLAS Operations and Maintenance Manual LACO Technologies