Table of Contents
Advertisement
LACO Technologies
Control Air Regulator
Helium Fill Regulator
NOTICE: Equipment damage can occur due to incorrect supply voltage
An incorrect supply voltage may damage the device.
•
Check whether the supply voltage specified on the ATLAS product label
matches the supply voltage available on site. Verify the available power source
matches product voltage.
Connect the device to the electric power supply using the supplied power cable.
Electrical interface connections are located on the right side of all ATLAS
configurations. Section 5.2 utilities, all the interfaces, connection specifications,
parts, and accessories used with each connection.
ATLAS Operations and Maintenance Manual
5 INSTALLATION
15
Advertisement
Table of Contents
