6 OPERATION
18
Touchscreen Display and Buttons
The controller can be connected to a color touchscreen for software interface. If a
touchscreen is not included, the controller can be connected to a virtual HMI
screen through Ethernet connection using a VNC viewer.
ID
Name
Function
1
Touchscreen
Press on the relevant area to perform the needed functions.
Display
The settings for many functions can be accessed quickly by pushing
down on an icon for more than 1 second.
2
Start / Stop/
On screen button. When in standby mode, press button to start a
Reset
cycle. When in test mode, press the button again to stop the test
cycle. When a fault occurs and is fixed, press button to reset to
standby mode.
Touchscreen Layout
The common areas of the touch screen are outlined below.
•
Upper-left – Setting or test screen navigation icons.
•
Upper-middle – Status text or screen name. Note that status text is also
displayed on the bottom of the screen.
•
Upper-right – Status icons.
•
Right-side menu on test screens for Quick-Access features .
ATLAS Operations and Maintenance Manual
3
LACO Technologies