Table of Contents
Advertisement
2 SAFETY
Electrical Dangers
• Considerable voltages arise inside the device. Touching parts where
• Disconnect the device from the electrical power supply prior to any
• Before starting the leak test, disconnect electrically operated test objects
• Before connecting the device to the power supply, make sure that the
Vacuum Force Dangers
• If equipped with an external part evac pump, there may be considerable
4
DANGER: This device was built according to recognized safety
regulations. Nevertheless, improper use or maintenance can
result in danger to life and limb of the operator or other persons
and damage to the device and other property. In order to prevent
safety issues, follow the items listed below.
•
Use the equipment only as intended
•
Only trained personnel should use the equipment.
2.2, 2.3, 2.4)
•
Follow all safety labels.
•
Follow all safety procedures when servicing equipment.
Below are summarized potential risks or hazards to service or operator personnel.
WARNING: Dangers from Electrical Power
electrical voltage is applied can result in death.
installation and maintenance work. Make sure that the electric power supply
is reconnected with authorization. Testing live parts results in danger to life.
from the power supply. Make sure that the electric power supply is
reconnected with authorization. The device contains electric components
that can be damaged from high electric voltage.
supply voltage specified on the device is the same as the local power supply.
WARNING: Dangers from Vacuum Forces
vacuum suction at the part charging/evac connection. Take care to not allow
debris, small objects, clothing, etc. to be sucked-up by the controller.
ATLAS Operations and Maintenance Manual
(section 2.1)
(section
LACO Technologies
Advertisement
Table of Contents
