SPX FLOW APV CU4 plus Instruction Manual page 46

Certificate No.: IECEx TUN 22.0020X
Date of issue: 2023-09-11
Manufacturer: SPX Flow Technology Germany GmbH
Gottlieb-Daimler-Str. 13
59439 Holzwickede
Germany
SPX Flow Technology Germany
Manufacturing
locations: GmbH
Gottlieb-Daimler-Str. 13
59439 Holzwickede
Germany
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme
Rules, IECEx 02 and Operational Documents as amended
STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
Edition:7.0
IEC 60079-7:2017 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
Edition:5.1
ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic methods and
Edition:1.0 requirements
ISO 80079-37:2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of
Edition:1.0 protection constructional safety "c", control of ignition source "b", liquid immersion "k"
This Certificate does not indicate compliance with safety and performance requirements
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Report:
DE/TUN/ExTR22.0018/00
Quality Assessment Report:
DE/TUN/QAR18.0002/02
IECEx Certificate
of Conformity
SPX Flow Technology Poland Sp. z
o.o.
Rolbieskiego 2
Bydgoszcz 85-862
Poland
other than those expressly included in the Standards listed above.
Page 2 of 3
Issue No: 0