Extension Of Sensor Cable - Optex DOS-20 Instruction Manual

Extension of sensor cable

The standard length of the sensor cable is 10 m. To extend the cable, refer to
the following.
To extend the cable, connection using pull box is recommended.
Max. cable length 1200 m
(nominal cross-sectional area of 0.2 to 1.25 mm
・ The cable clamp fits the cable sheath diameter of 6 to 8 mm.
・ The sensor cable must be shielded (CVV-S) with a nominal
cross-sectional area of 0.2 to 1.25 mm
Pull box, etc.
2
.
.)
2
11