Disconnection Device - Smeg Tethys D60 User Manual

10.4.3 Disconnection device

CIRCUIT-BREAKER
A CIRCUIT-BREAKER must be installed for each appliance.
Circuit-breaker characteristics
The appliance is fitted with overcurrent protection devices.
However, a protective device specifically for the appliance (e.g. magnetothermal breaker or fuse
on every phase, suitably rated for the electrical data stated above) should be installed in the
room's electrical panel.
User Manual
a. Omnipolar: must break all live conductors;
b. Easily accessible to the user;
c. Easily operated (no tool must be required);
d. Located in close proximity to the appliance;
e. Clearly marked as the appliance circuit-breaker.
Tethys D60 - Tethys T60 - Tethys T45 Page 71 - 77