Tethys T45
INSTALLATION ON STAND
If the device is installed on the optional stand, with having height (base height) "HB", all the measurements of height
above the supporting surface provided in this document must be increased by the said height "HB".
HMi = Hi + HB
Where:
Hi = normal height stated in the document
HB = height of appliance stand
HMi = height recalculated for appliance installed on stand
fig. 43 – Optional Stand.
User Manual
Tethys D60 - Tethys T60 - Tethys T45
Page 69 - 77