Temporary Disabling Of Demineralised Water - Smeg Tethys D60 User Manual

5.11.3 TEMPORARY DISABLING OF DEMINERALISED WATER

Press the "Start/Stop" and "Door opening" buttons simultaneously for a moment to display the
status of the "demineralised water disabling" option.
The Selection buttons can be used to deselect the use of demineralised water.
Modifications to the parameter must be confirmed using the "Start/Stop" button.
Whenever the option is active, the message "no dE ", meaning "No demi" (temporary disabling of demineralised
water), appears on the display for 3 seconds.
If the option is disabled by pressing the two keys mentioned above, the message "dE" is shown on the screen for 3
seconds.
This option can only be used if the use of demineralised water has been activated.
(See parameter "7-Demineralised water" below in the setup parameters section, in the: SETUP MODE - "FUNCTIONS")
User Manual
fig. 20 – Example of use of the delayed start to set a delay of 1 h
Tethys D60 - Tethys T60 - Tethys T45 Page 31 - 77