Smeg Tethys D60 User Manual page 58

ALARM ID DESCRIPTION
AF:93 Appliance maintenance
Temperature below actual
AF:94 temperature during extension
phase. T not stable
AF:96 Chamber water level incorrect.
User Manual
The appliance has exceeded the set number of operating hours
since installation or since its last service: contact the After-Sales
Service for routine maintenance.
Press the Start/Stop button to override the message and
continue using the device.
The service must be carried out as soon as possible to keep the
device in good working order.
The device's internal memory records the event.
For the user: follow the DEFAULT PROCEDURE described above.
If the alarm does not disappear, follow the RESET PROCEDURE.
Check the intake and drain water connections and that the
appliance has been installed as specified.
If leaks are noticed around the device: turn off the water supply
taps.
For the user: follow the DEFAULT PROCEDURE described above.
If the alarm does not disappear, follow the RESET PROCEDURE.
Tethys D60 - Tethys T60 - Tethys T45
USER ACTION
Page 58 - 77