17.6
SETTING SERVICE INTERVAL, LANGUAGE, CONTROL TEMPERATURES, TEMPERATURE
SENSOR TYPES AND LIQUID ALARM RESET
To change service interval, language, control temperatures, temperature sensor types and to reset the liquid alarm:
1. Disconnect the device from the mains.
2. Hold the PRG key
The following is displayed (2nd screen
3. Select the parameter
4. Use the arrow keys,
. Press and hold down the PRG key
www.mc-techgroup.com
down and switch the device back on until the message to release the key is displayed.
):
to be changed using the arrow key
the settings and values can be changed and confirmed with the PRG key
for 5 seconds to apply all changes.
CSS-VC-1.6 | 1.02.01
and confirm using the PRG key.
31