19.3.1 Mounting Instructions For Peristaltic Pump; 19.3.2 Changing The Pump Tubing; Figure 15 Sr25.2: Mounting Distance Between Front Panel And Pump Motor - M&C CSS-VC1 Instruction Manual

19.3.1 MOUNTING INSTRUCTIONS FOR PERISTALTIC PUMP

Make sure to mount the pump to the front of the cooler with a minimum distance of 3.5 mm [≈ 0.138"] and a
maximum distance of 5.5 mm [≈ 0.216"] between the pump motor and the front panel. The minimum distance
avoids damage to the pump motor and the maximum distance prevents the motor shaft from getting loose.
1 Pump head (outside the device housing)
3 Recommended mounting distance
Figure 15 SR25.2: Mounting distance between front panel and pump motor
Note

19.3.2 CHANGING THE PUMP TUBING

Warning
www.mc-techgroup.com
2 Device front panel
4 Pump motor (inside the device housing)
For detailed mounting instructions, see the instruction manual for the peristaltic pump
series SR : The manual is available on our website www.mc-techgroup.com.
®
Aggressive media residues possible.
On disassembly, repairing or cleaning of the hose pump, wear protective
glasses and appropriate protective clothing!
If you return the hose pump to M&C customer service for repair, we will ask for
information concerning the delivered liquid.
The pump should be cleaned of hazardous or highly aggressive contaminants
prior to return shipment.
CSS-VC-1.6 | 1.02.01 41