Appendix - M&C CSS-VC1 Instruction Manual

23

APPENDIX

•
Incident messages and their meaning
•
TCU menu
Further product documentation can be viewed and accessed on the home page:
www.mc-techgroup.com.
50
Gas hazard
Risk rank group A-B-C
The hazard potential mainly depends on the gas to be extracted.
If toxic gases, oxygen displacing or explosive gases are conveyed with the product, an
additional risk assessment by the operator is mandatory.
In principle, the gas paths must be purged with inert gas or air before opening the gas-
carrying parts.
The escape of potentially harmful gas from the open process connections must be
prevented.
The relevant safety regulations must be observed for the media to be conveyed. If
necessary, flush the gas-carrying parts with a suitable inert gas. In the event of a gas
leakage, the product may only be opened with suitable PPE or with a monitoring system.
Furthermore, the work safety regulations of the operator must be observed.
Caution crushing hazard
Risk rank group A
The work must be performed by trained personnel only.
This applies to products weighing less than < 40 kg [≈ 88.2 lbs]:
The product can be transported by 1 to 2 person(s). The instructions for appropriate
personal protective equipment (PPE) must be observed.
The weight specifications are contained in the technical data of this product.
Furthermore, the work safety regulations of the operator must be observed.
CSS-VC-1.6 | 1.02.01 www.mc-techgroup.com