Temperature Alarms From Cooler And Temperature Control Module; Flow Disturbance And Liquid Alarms - M&C CSS-VC1 Instruction Manual

18.2 TEMPERATURE ALARMS FROM THE COOLER
Error message
Lowtemp.: 1
Hightemp: 1
T> Max: 1
T <min:1
Lowtemp.: 2
Hightemp.: 2
T> Max.: 2
T <Min: 2
The following screen appears for channel 2 if the control temperature (+ 10 °C alarm hysteresis) is exceeded:
This prevents the heated line or the heated probe from overheating due to a defect! The triggered alarm (red LED)
must be acknowledged by pressing any key. If the error is not corrected, the error screen comes back after 60 s.
18.3

FLOW DISTURBANCE AND LIQUID ALARMS

Error message
FA-Warn: 1, 2
LA-Alarm: 1, 2
LA-Break: 1, 2
In case of liquid alarm and activated LA-Reset (see chapter 17.6) the following screen occurs:
34
Alarm Warning
x -
x -
x
x
- x
x -
x
x
Alarm Warning
- x
x -
x -
CSS-VC-1.6 | 1.02.01
LED Error
red Low temperature cooler
red High temperature cooler
red Temperature sensor range exceeded =>
sensor defective
red Temperature sensor measuring range fallen
below => sensor defective
yellow Low temperature channel 2
red High temperature channel 2
red Temperature sensor range exceeded =>
sensor defective
red Temperature sensor measuring range fallen
below => sensor defective
LED Error
yellow Flow disturbance channels 1 and/or 2
red Liquid alarm channel 1and/or 2
red Cable break liquid sensor channel 1 and/or 2
www.mc-techgroup.com