Figure 7
Upper and lower channel of CSS-VC2
12.4.2 CONNECTION OF INDIVIDUAL ALARMS, EXTERNAL PUMP CONTROL AND EXTERNAL
COOLER TEMPERATURE DISPLAY (PART NO. 01G6175)
The electrical connection of the individual alarms is via two connectors, depending on the mounting of the
connection plate, either on the back or in the lid of the housing.
The corresponding 11 and 12-pin connectors are included.
The connectors are assigned as follows:
External pump control 2
External pump control 1
Pump 1&2 GND
Figure 8
Plug assignment for design with individual alarms (Part No. 01G6175)
www.mc-techgroup.com
CSS-VC-1.6 | 1.02.01
21