Select Physical Unit For Process Control; Configure Process Values - Burkert AE3363 Quick Start Manual

9.7 Select physical unit for process
control
Setting option:
Using the Bürkert Communicator PC software or the
display of the device (optional).
Display operation: button functions
Select, activate
To select the physical unit, switch to the "Parameters" detailed
view for process controllers.
How to switch from view 1 to the detailed view:
→
When setting with Bürkert Communicator, select
in the navigation area.
Process controller
→
When setting on the display, switch from view 1 to
and select
GURATION Process
You are now in the "Parameters" detailed view.
How to select the physical unit for process control:
→
Select UNIT.
→
Select physical unit.
T he physical unit is now selected.
48
Confirm Back
CONFI-
controller.
english
Type 3363, 3364, 3365
Start-up
9.8

Configure process values

Setting option:
Using the Bürkert Communicator PC software or the
display of the device (optional).
Display operation: button functions
Select, activate
To configure process values, you to the "Parameters" detailed
view for inputs/outputs.
How to switch from view 1 to the detailed view:
→
When setting with Bürkert Communicator, select Inputs/
Outputs in the navigation area.
→
For settings on the display, switch from view 1 to
RATION and select Inputs/Outputs.
You are now in the "Parameters" detailed view.
9.8.1 Selecting and scaling standard signal for
process set-point value
How to select the standard signal for the process set-point
value:
→
Select SP/CMD.
→
Select ANALOG.type.
→
Select standard signal.
Confirm Back
CONFIGU-