Select Physical Unit For Process Control - Burkert 3361 Operating Instructions Manual

Types 3360 and 3361
Start-up
11.8

Select physical unit for process control

Setting option:
Using the Bürkert Communicator software or the display of the device (optional).
Settings are created on the PC using the büS service interface and the Bürkert Communicator
software. It requires the USB büS interface set available as an accessory.
Display operation: button functions
Select, activate
To select the physical unit, switch to the "Parameters" detailed view for process controllers.
How to switch to detailed view:
→
When using Bürkert Communicator for the configuration, select Process Controller in the navigation
area.
→
When using the display for the configuration, switch to
select Process Controller.
You are now in the "Parameter" detailed view.
How to select the physical unit for process control:
→
Select UNIT.
→
Select physical unit.
The physical unit is now selected.
Confirm
CONFIGURATION
Back
on the home screen and
english
79