11.8
Select physical unit for process control
Setting option:
Using the Bürkert Communicator PC software or the display of the device (optional).
Settings are created on the PC using the büS service interface and the "Bürkert Communicator" PC
software. It requires the USB büS interface set available as an accessory.
Display operation: button functions
Select, activate
To select the physical unit, switch to the "Parameters" detailed view for process controllers.
How to switch to detailed view:
→
When using Bürkert Communicator for the configuration, select
area.
→
When using the display for the configuration, switch to
select Process Controller.
You are now in the "Parameter" detailed view.
How to select the physical unit for process control:
→
Select UNIT.
→
Select physical unit.
The physical unit is now selected.
90
Confirm
CONFIGURATION
English
Typ 3363, 3364, 3365
Start-up
Back
Process Controller
in the navigation
on the home screen and