Set Standard Signal For Set-Point Position; Select Physical Unit For Process Control - Burkert AE3360 Quick Start Manual

Type 3360, 3361
9.6 Set standard signal for set-point
position
Configuration option:
Using the Bürkert Communicator PC software or the display
of the device (optional).
Display operation: Button functions
Select, activate
To set the standard signal, switch to the "Parameters" detailed view
for inputs/outputs.
How to switch to detailed view:
→
When using Bürkert Communicator for the configuration, select
Inputs/Outputs in the navigation area.
→
When using the display for the configuration, switch to CONFI-
GURATION on the home screen and select Inputs/Outputs.
You are now in the "Parameters" detailed view.
How to configure the standard signal:
→
Select CMD.
→
Select ANALOG.type.
→
Select standard signal.
You have set the standard signal.
Start-up
Confirm Back
9.7 Select physical unit for process
control
Configuration option:
Using the Bürkert Communicator PC software or the display
of the device (optional).
Display operation: Button functions
Select, activate
To select the physical unit, switch to the "Parameters" detailed view
for process controllers.
How to switch from view 1 to the detailed view:
→
When using Bürkert Communicator for the configuration, select
Process Controller in the navigation area.
→
When using the display for the configuration, switch to CON-
FIGURATION on the home screen and select Process
Controller.
You are now in the "Parameters" detailed view.
How to select the physical unit for process control:
→
Select UNIT.
→
Select physical unit.
T he physical unit is now selected.
English
Confirm Back
41