Paper and other throughput stocks
stocks and sizes
System Overview Guide
This appendix provides information and specifications for the
media you use with your Xerox DocuPrint 96, 4635, or 180
printer. Instructions for ordering supplies are also provided.
Consumable supplies (those that are depleted during operation
of the system), such as paper, dry ink, developer, fuser agent,
etc., must be ordered for your printer. It is important that an
adequate supply of these items be on hand for installation, and
that your supply be maintained afterwards.
The success of any print run is greatly dependent on the proper
selection, care, and handling of the stock used.
You need to select your paper carefully. If you do not use the
proper paper, you increase the probability of paper jams and
misfeeds. The stocks you use must meet the specifications set
forth by Xerox for operability in the printer. For additional
information about paper specifications, refer to Helpful Facts
about Paper, delivered with your printer.
Your 96, 4635 or 180 printer accepts the following standard size
7 by 10 inches / 178 by 254 mm (with 7-inch kit option)
B5: 7.17 by 10.12 inches / 182 by 257 mm (with 7-inch
US Letter: 8.5 by 11 inches / 216 by 279 mm
US Legal: 8.5 by 14 inches / 216 by 356 mm
A4: 8.27 by 11.69 inches / 210 by 297 mm
B4 (European): 9.84 by 13.89 inches / 250 by 353 mm