Faults Tab; Supplies Tab - Xerox D125 User Manual

Print Mode
Select Print Mode to identify the current printing mode of the printer. Select Off-Line
or On-Line. Select one of the following:
PCL Emulation: Select Item Number and enter the number using the numeric keypad.
Select the current value and select Confirm.
PDF Select Programming: Select Item Number and enter the number using the numeric
keypad. Select the current value and select Confirm. Select a Password to save. Enter
the password and select Save.
HP-GL/2 Emulation: Select this to retrieve programming. Select Factory Defaults or
Custom Settings and select a job. Select Programming and select the item number.
Select Store/Delete Programming and select a job. Either Store the Current Selections
or Delete. Select Default Programming and select either Factory Defaults or Custom
Settings.

Faults tab

The Faults tab provides access to fault information and error messages. Access to this
tab is by pressing the Machine Status button on the control panel and selecting the
Fault tab on the UI.
Current Faults
If there are any current faults affecting the machine, select the Current Faults button
to view a list those faults. From the Current Faults screen, select a fault to view
instructions on how to fix the error.
Current Messages
Select the Current Messages button on the Faults tab to view a list of current machine
messages. These messages indicate actions that need to be taken to continue or resume
the proper operation of the machine.
Fault History
Select the Fault History button to display a list of past fault codes. This information
can be used to diagnose and solve machine problems.

Supplies tab

The Supplies tab provides status information about the customer replaceable units
(CRUs) that are used in the machine.
®
Xerox D110/D125/D136 Printer
User Guide
Machine Status
8-3