Xerox DocuPrint 100 User Manual page 100

Paper performance guidelines
Table B-2. Trays 3, 4, 5 and 6 (or high capacity trays) performance guide
Paper Superior performance
Size 8 by 10 to 11.69 by 17
a inches / 203 by 254 to 297
range
by 432 mm. Includes:
• 11 by 14 inches
• 11 by 17 inches
• B4 (250 by 353 mm)
• A3 (297 by 420 mm)
Weight 20 to 110 pounds / 80 to
range 200 gsm
Capacity Tray 3: 2600 sheets, 20
pound / 80 gsm paper
Tray 4: 2600 sheets, 20
pound/80 gsm paper
Type or • Xerographic paper in
condition good condition
• Predrilled stock (fanned
thoroughly)
a. Optional 7 by 10-inch enablement kit allows 7 by 10 inches / 178 by 254 mm paper size.
b. Make sure that heavy weight paper levers (located in areas 2 and 4 of the printer) are in the
appropriate position for the weight of paper being used.
c. Curl direction should be determined before loading paper into trays. For additional information,
refer to the "Clearing paper misfeeds and jams" chapter in your Troubleshooting Guide.
d. Curl direction should be determined before loading paper into trays. For additional information,
refer to the "Clearing paper misfeeds and jams" chapter in your Troubleshooting Guide.
e. Curl direction should be determined before loading paper into trays. For additional information,
refer to the "Clearing paper misfeeds and jams" chapter in your Troubleshooting Guide.
B-2
Good performance
16 to 20 pounds/60 to 80
b
gsm
• Slightly curled paper
• Manual two-sided
(duplex) prints
• High speed label stock
Performance limits and
suggested alternatives
Smaller or larger sizes
cannot be used.
Weights outside the limits
shown are not
recommended.
For greater capacity, use the
Autoswitch feature.
c • Excessively curled
d
paper
• Curl direction should be
determined before
loading paper into tray.
• DO NOT use mylar
reinforced paper in trays
3, 4, 5 or 6. Hardware
damage may result.
Use trays 1 or 2.
System Overview Guide
e