Xerox DocuPrint 100 User Manual page 38

Printer components and options
Processor feeder
trays
Feeder tray control
panels
3-2
NOTE: The DocuPrint MICR NPS/IPS models utilize the same
hardware and operating system as the non-MICR NPS/IPS
models. However, the Image Development systems have been
modified to enable MICR font reproduction.
Two processor feeder trays are located in the main part of the
printer:
• The main tray (tray 1) holds up to 1100 sheets of 20 pound or
80 gsm (grams per square meter) paper.
• The auxiliary tray (tray 2) holds up to 600 sheets of 20 pound
or 80 gsm paper.
Each tray can handle paper from 8 x 10 inches/203 x 254 mm
to 9.02 x 14.33 inches/230 x 364 mm.
Each processor feeder tray and HCF tray has a control panel
consisting of a button, indicators, and paper level displays.
Ready Please
Tray
to open wait
unload
1 3
2
Figure 3-2. Feeder tray control panel
1. Ready to Open indicator
2. Please Wait indicator
3. Tray Unlock button
4. Paper Level indicators
1. Ready to Open indicator
This indicator glows when paper can be added to the tray.
2. Please Wait indicator
This indicator shows that the tray is in motion. It is lit when
the Tray Unlock button is pressed, when the tray is being
lowered, or when the tray is being raised. The indicator goes
off when the tray elevator reaches its destination.
4
System Overview Guide