Move The Printer; Move The Printer To Another Location; Transporting The Printer - Pantum CM2100 Series User Manual

Color laser multifunction printer (adf model)

Hide thumbs Also See for CM2100 Series:

Table of Contents

Move the printer

:To avoid the risk of electrical shock, do not place or use this product near water or wet

locations.

:If the printer weighs more than 18 kg, then it requires two or more trained personnel to lift it

safely.

:To avoid the risk of fire or electrical shock, use only the power cord provided with this

product or the manufacturer's authorized replacement.

:When moving the printer, follow these guidelines to avoid personal injury or printer damage:

• Make sure that all covers and trays are closed.

• Turn off the printer, and then unplug the power cord from the electrical outlet.

• Disconnect all cords and cables from the printer.

• If the printer has casters on its base, then carefully move it to the new location. Use caution when

passing over thresholds and breaks in flooring.

• Always use the handholds on the printer to lift it.

• Any cart used to move the printer must have a surface able to support the full footprint of the

printer.

• Keep the printer upright.

• Avoid violent vibrations when moving.

• Make sure that your fingers are not under the printer when you set it down.

• Make sure that there is adequate clearance around the printer.

Damage to the printer caused by improper handling is not covered by the printer warranty.

Note:

•

When transporting the printer, use the original packaging.

Table of Contents