Move The Printer; Move The Printer To Another Location; Transporting The Printer - Pantum PT14C1A Series User Manual

Move the printer

Move the printer to another location

:To avoid the risk of electrical shock, do not place or use this product near water or wet
locations.
:If the printer weighs more than 18 kg, then it requires two or more trained personnel to lift it
safely.
:To avoid the risk of fire or electrical shock, use only the power cord provided with this
product or the manufacturer's authorized replacement.
:When moving the printer, follow these guidelines to avoid personal injury or printer damage:
• Make sure that all covers and trays are closed.
• Turn off the printer, and then unplug the power cord from the electrical outlet.
• Disconnect all cords and cables from the printer.
• If the printer has casters on its base, then carefully move it to the new location. Use caution when
passing over thresholds and breaks in flooring.
• Always use the handholds on the printer to lift it.
• Any cart used to move the printer must have a surface able to support the full footprint of the
printer.
• Keep the printer upright.
• Avoid violent vibrations when moving.
• Make sure that your fingers are not under the printer when you set it down.
• Make sure that there is adequate clearance around the printer.
Note: • Damage to the printer caused by improper handling is not covered by the printer warranty.

Transporting the printer

When transporting the printer, use the original packaging.
36