Pantum CM2100 Series User Manual page 82

• The toner cartridge is dirty or leaks
toner.
• The print media does not meet the
usage specification. For example, the
print media is textured, damp, or too
rough.
• The paper used has been stored in
Mottled print
the air for a prolonged time.
and dots
• Toner cartridge is not installed
properly.
• The print mode is set incorrectly.
• The feed channel is dirty.
• If toner spots appear when copying
and scanning, the platen glass may
be dirty.
• The scanner is dirty or damaged.
• The tray fails to load the media
properly.
• The paper used has been stored in
the air for a prolonged time.
Paper crooked
• The tray fails to load the media
properly.
• The print media does not meet the
usage specification. For example, the
print media is textured, damp, or too
rough.
• The paper used has been stored in
Print is crooked
the air for a prolonged time.
or skewed
• The feed channel is dirty.
• Toner cartridge is not installed
properly.
• If all-black image appear when
copying and scanning, maybe it is
scanning exposure, and the cover on
the manuscript is not properly
closed.
Single color or
• The scanner is damaged.
black images
• Please contact the customer service
center.
• Please properly use the print media within
the specification range.
• Keep the paper in its original wrapper
before use.
• Pull out the toner cartridge tray, remove
the toner cartridge, then insert the toner
cartridge, and insert the toner cartridge
tray.
• Readjust the transfer parameters. Please
refer to Transfer Parameter Settings
how to adjust them.
• Clean the feed channel.
• Clean the platen glass.
• Please load the paper correctly. See
Paper Feeding for how to feed the paper
correctly.
• Keep the paper in its original wrapper
before use.
• Please load the paper correctly. See
Paper Feeding for how to feed the paper
correctly.
• Please properly use the print media within
the specification range.
• Keep the paper in its original wrapper
before use.
• Clean the feed channel.
• Pull out the toner cartridge tray, remove
the toner cartridge, then insert the toner
cartridge, and insert the toner cartridge
tray.
• Please close the cover on the manuscript,
and then carry out copying and scanning.
• Please contact the customer service
center.
for
68