Scan To Pc; Scan To E-Mail; Scan To Ftp - Pantum CM2100 Series User Manual

Scan to PC

You may operate the printer's control panel to scan a file to PC. (Only support connection method
of USB connection line.)
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2. Put an original on the glass platen or into the ADF
3. Click "Scan-Scan to PC" in printer control panel.
4. Select proper scan setting, click "Scan" button to make a scan.
5. If you want to perform a merge scan, place the documents that you want to continue scanning
on the glass platen, press the "Start" button and proceed with scanning the second page. (ADFsd
can make scan continuously without interruption.)

Scan to E-mail

You can scan the file as an attachment into the email application. The steps are as follows:
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2. Set up SMTP client.
3. Configure the E-mail address book
4. Put an original on the glass platen or into the ADF
5. Click "Scan-Scan to Email" in printer control panel.
6. Select proper scan setting, click "Scan" button to make a scan.
7. If you want to perform a merge scan, place the documents that you want to continue scanning
on the glass platen, press the "Start" button and proceed with scanning the second page. (ADFsd
can make scan continuously without interruption.)
Instructions for settings of group e-mail sending:
Set the group name for group e-mail sending by webpage, and set the members, i.e.the receivers,
in the group of group email. After finishing scanning, firmware will send the scanned documents to
the mail server. Then mail server sends the documents to every member of the group.

Scan to FTP

Be sure the user is in an Internet-connected environment in scanning files to FTP server. If you
want to scan large files, you may need to input the server address, user name and password to log
in the server, with specific operation steps as below:
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2. Configure the FTP address book
3. Put an original on the glass platen or into the ADF
4. Click "Scan-Scan to FTP" in printer control panel.
5. Select proper scan setting, click "Scan" button to make a scan.
6. If you want to perform a merge scan, place the documents that you want to continue scanning
on the glass platen, press the "Start" button and proceed with scanning the second page. (ADFsd
can make scan continuously without interruption.)
34