Pantum CM2100 Series User Manual page 79

Paper feed
failure
Paper Jam
Problems
with Paper
Handling
Print
multipage
feed
If the problem persists, please contact the customer service center. See the Three
Note: •
Guarantees certificate for contact details.
• The print media has been
loaded incorrectly.
• The print media is out of the
supported media range.
The feed roller is dirty.
•
• Too many papers in paper
tray.
• Too many papers in paper
tray.
• The print media is out of the
supported media range.
• There is foreign matter in the
paper path.
• The feed roller is dirty.
• Internal parts failure.
• Excessive static electricity on
the print media.
• The print media is damp and
is sticking together.
• Internal parts failure.
• Please install the printing medium
correctly. If a special printing
medium is used, enable the
multipurpose feed tray mode.
• Please use the print media within
the specification range.
Clean the feed roller.
•
• Take the excessive papers out from
tray. For printing on a special
medium, use the multipurpose feed
tray.
• Take the excessive papers out from
tray. For printing on a special
medium, use the multipurpose feed
tray.
• Make sure to use the paper that
meets specifications. For printing on
a special medium, use the
multipurpose feed tray.
• Clean the paper path.
• Clean the feed roller.
• Separate the print media to
eliminate some static electricity. It is
suggested that you use the
recommended print media.
• Separate the print media or use
better quality and dry print media.
65