Routine Maintenance; Cleaning The Printer - Pantum CM2100 Series User Manual

Color laser multifunction printer (adf model)

Hide thumbs Also See for CM2100 Series:

Table of Contents

Routine Maintenance

•

Note:

Printer appearance may differ because of different models and functions, so the schematic

diagram is only for your reference.

Some parts of the printer are still in high temperature within a short time after use. To prevent

burns, please don't directly touch places labeled with high temperature warning in contact with

internal components after opening the printer's front or rear cover.

• Disconnect the printer before cleaning.

Note:

• Please use mild detergents.

• Use caution when using the printer display to prevent pressing or damaging the touch display.

Please use a soft dry cloth or dip in a neutral detergent or ethanol to clean the display surface. Do

not use any organic solvents, acidic or alkaline solutions for cleaning.

Cleaning the printer

To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the

power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

Note:

•

Please perform this job every few months.

• Damage to the printer caused by improper handling is not covered by the printer warranty.

Table of Contents