Auto Resume After Fault Clearance - Xerox Color 1000 Press System Administration Manual

System Settings
6. Using the keyboard, enter the New Value to switch on a feature.
7. Select the Apply button.
The NVM Read/Write window displays the entered value as the Current Value.
8. Select Close to save and close your new setting.
9. Select OK to close the System Settings window.
10. Select Logoff to exit the Administrator mode.
11. Run your print job.
Important
After running your print job, switch off the NVM feature; this will ensure that the
machine runs at maximum efficiency and will prevent paper jams.
Related Topics:
Logging on as Administrator

Auto Resume After Fault Clearance

The Auto Resume After Fault Clearance feature lets you set the time period that elapses
between the time that fault clearance procedures have been performed on the machine
and the time the machine will automatically resume operation. This feature makes it
unnecessary to manually restart the machine after clearing faults.
The timer begins when all faults have been cleared from the machine. At the end of the
specified time the machine will automatically resume printing.
5-14 ®
Xerox Color 800/1000 Press
System Administration Guide