Updating A Waypoint From A Contact - Codan Envoy Control Getting Started Manual

1
1

Updating a waypoint from a contact

You can update a waypoint using information gathered from a Get
Position call for a contact.
To update a waypoint from a contact:
1
1
1
E ™ T
NVOY RANSCEIVER
If you want to save the GPS information as a waypoint:
• Press
(Select).
• Enter the name that you want to use for the waypoint.
NOTE:
• Press
(Select).
Press (Close).
Do one of the following:
Press 9|
• GPS
• From the main menu, select
(GPS).
to move to the Distance and Bearing tab.
Press
Press (Waypoint), then press
Contacts tab.
The information available is filtered on Get Position calls to
contacts that have been set up in User Data > Contacts.
G S G
ETTING TARTED UIDE
(Options), scroll to Save, then press
If required, you can change the GPS
information.
(Options), scroll to Save, then press
.
O
PERATING THE TRANSCEIVER
U
SING
(General), then
or to select the
GPS
77