Updating A Waypoint From The Call History - Codan Envoy Control Getting Started Manual

O
PERATING THE TRANSCEIVER
U GPS
SING

Updating a waypoint from the Call History

You can update a waypoint using information from a Get Position call
or a received Send Position call in the Call History. If you do not want
to use the waypoint information immediately, you may save it.
Waypoints that are saved via the Distance and Bearing tab are
automatically added to the Waypoints tab at the same location, and to
the list of waypoints in User Data > Waypoints.
To update a waypoint from the Call History:
1
1
1
1
1
76
Do one of the following:
Press 9|
• GPS
• From the main menu, select
(GPS).
to move to the Distance and Bearing tab.
Press
Press (Waypoint), then press
History tab.
The information available is filtered on Get Position calls that
you have sent and Send Position calls that you have received.
Press or to scroll to the call containing the GPS
information that you want to use for the waypoint.
If you want to set the GPS information as the current waypoint,
(Options), scroll to Set, then press
press
.
E ™ T
NVOY RANSCEIVER
(General), then
to select the Call
or
(Select).
G S
ETTING TARTED
G
UIDE