Selecting Digital Voice Mute - Codan Envoy Control Getting Started Manual

1
1
Related links:

Selecting digital voice mute

NOTE:
NOTE:
To select digital voice mute:
1
1
1
E ™ T
NVOY RANSCEIVER
Press or to select the digital voice rate that you want to use.
Press (OK).
Digital voice rate on page 67
Digital voice mute is available when a DV option (with
or without the AES-256 Encryption upgrade) or the
AES-256 DV Encryptor is active, and scanning is
switched off or paused.
If you want to suppress any noise burst on a connected or
built-in loudspeaker during an operational event (for
example, changing a channel or mode) select the Muted
unless digital voice check box in Settings >
Security > Digital Voice Options.
Switch off scanning.
If you are using a 2220 Handset or 2230 Desk Console,
press SEC , then press
status bar on the channel screen.
If you are using a 2221 Handset:
• Press
• Press or
• Press
• Press
• Press or
• Press
Repeat these steps until D is shown in the centre of the
•
status bar on the channel screen.
G S G
ETTING TARTED UIDE
until D is shown in the centre of the
V/S
(Options).
to scroll to the Secure On option.
(Select).
(Options).
to scroll to the V/S/D option.
(Select).
O
PERATING THE TRANSCEIVER
U
SING DIGITAL VOICE
73