Updating A Waypoint From A Contact - Codan Envoy Getting Started Manual

Updating a waypoint from a contact

E ® T
NVOY RANSCEIVER
Press or
1
information that you want to use for the waypoint.
If you want to set the GPS information as the current
1
waypoint, press
press (Select).
If you want to save the GPS information as a waypoint:
1
• Press
press
• Enter the name that you want to use for the waypoint.
NOTE:
• Press
press
Press (Close).
1
You can update a waypoint using information gathered from a Get
Position call for a contact.
To update a waypoint from a contact:
Do one of the following:
1
• Press 9|
• From the main menu, select
(GPS).
to move to the Distance and Bearing tab.
Press
1
Press (Waypoint), then press
1
Contacts tab.
The information available is filtered on Get Position calls to
contacts that have been set up in User Data > Contacts.
G S G
ETTING TARTED
to scroll to the call containing the GPS
(Options), scroll to Set, then
(Options), scroll to Save, then
(Select).
If required, you can change the GPS
information.
(Options), scroll to Save, then
(Select).
.
GPS
UIDE
O
PERATING THE TRANSCEIVER
U
SING
(General), then
or to select the
GPS
77