Switching Scanning On Or Off; Pausing Scanning - Codan Envoy Control Getting Started Manual

O
PERATING THE TRANSCEIVER
S
CANNING CHANNELS

Switching scanning on or off

To switch scanning on or off:
1

Pausing scanning

To pause scanning:
1
42
Press SCAN.
If a call is not in progress, scanning is toggled on or off.
If a call is in progress, the call is ended and the transceiver begins
scanning.
If a call from a modem (or any other peripheral device) is in
progress, you are prompted to break the system lock to resume
scanning.
NOTE:
When scanning is switched on, mute is also
switched on.
NOTE:
If you press PTT while the transceiver is scanning,
the scan is stopped.
Do one of the following:
• To pause scanning on the last-selected channel,
press OK.
• To pause scanning and scroll to another channel, press
or .
The channel/modes through which you can scroll are those in the
scan tables that are being scanned. They are not listed
alphabetically but in the order in which they are being scanned.
If you do not press a key within 30 sec, the transceiver
automatically resumes scanning, by default.
E ™ T
NVOY RANSCEIVER
G S G
ETTING TARTED UIDE