Selecting An Antenna - Codan Envoy Control Getting Started Manual

Selecting an antenna

Each type of antenna has a specific requirement for tuning, and the
transceiver uses a different protocol for each one. You must select the
type of antenna that is used in your station so that the transceiver knows
how to tune the antenna. Some antennas, such as broadband antennas,
do not require tuning.
To select an antenna:
1
1
1
E ™ T
NVOY RANSCEIVER
Press or to scroll to the antenna type that you want to use,
then press OK.
Press (Save) to save the information.
Do one of the following:
• If you want to connect an accessory to the 15-way
connector of the RFU, press
from Selecting a peripheral device on page
• If you do not want to connect an accessory, press
(No), then press OK to close the wizard.
G S G
ETTING TARTED UIDE
U
SING THE WIZARD
U
SING THE WIZARD
(Yes), then continue
30.
29