Updating A Waypoint From The Call History - Codan Envoy Getting Started Manual

O
PERATING THE TRANSCEIVER
U GPS
SING
1
1

Updating a waypoint from the Call History

You can update a waypoint using information from a Get Position
call or a received Send Position call in the Call History. If you do
not want to use the waypoint information immediately, you may
save it. Waypoints that are saved via the Distance and Bearing
tab are automatically added to the Waypoints tab at the same
location, and to the list of waypoints in User Data > Waypoints.
To update a waypoint from the Call History:
1
1
1
76
Press to move to the waypoint that you want to set.
(Options), scroll to Set, then press
Press
(Select).
Do one of the following:
• Press 9|
GPS
• From the main menu, select
(GPS).
Press to move to the Distance and Bearing tab.
Press (Waypoint), then press
Call History tab.
The information available is filtered on Get Position calls
that you have sent and Send Position calls that you have
received.
E
.
® T
NVOY RANSCEIVER
(General), then
or to select the
G S G
ETTING TARTED UIDE