Print Area Is Not Centered On The Paper - Xerox Phaser 7760 User Manual

Print Area Is Not Centered on the Paper

Problem
The printed area appears outside the margins on the page.
Solution
1.
2.
3.
4.
See also:
Downloaded From ManualsPrinter.com Manuals
On the control panel, select
Select the tray you are using, and then press the OK button.
Verify that the tray is set to the correct paper size.
If the problem continues, use the Calibrate Margins page to shift the print area on the
paper. The print area appears as a dashed rectangle on the Calibrate Margins page; the
printer does not print outside this rectangle.
a. On the control panel, select
b.
Select
Print Quality Problems
c.
Select Calibrate Margins
d. Select
Calibrate Margins Page
e. Select the appropriate tray to calibrate, and then press the OK button.
f. Follow the instructions on the Calibrate Margins page.
Advanced Features Guide at
Phaser® 7760 Color Laser Printer
, and then press the OK button.
Paper Tray Setup
, and then press the OK button.
Troubleshooting
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
www.xerox.com/office/7760support
4-17
Solving Print-Quality Problems