Removable Towing Hook - Hyundai SX2 Owner's Manual

When towing your vehicle without wheel
dollies:
1. Release the parking brake before
turning off the engine.
2. Press the Engine Start/Stop button to
the OFF position.
3. Change the gear to N (Neutral) whilst
depressing the brake pedal.
4. Press the Engine Start/Stop button to
the ACC position.
WARNING
If your vehicle is equipped with a rollover
sensor, press the Engine Start/Stop
button in the OFF or ACC position when
the vehicle is being towed. The side
impact and curtain air bag may deploy if
the sensor detects the situation as a
rollover.
Information
Always shift the gear to N (Neutral) to
prevent damage to the transmission
before towing.

Removable towing hook

Front
2C_TowingHook
Rear
2C_TowingHook_2
(1) Install
(2) Remove
1. Open the tailgate and remove the
towing hook from the tool case.
2. Remove the hole cover pressing the
lower part of the cover on the bumper.
3. Install the towing hook by turning it
clockwise into the hole until it is fully
secured.
4. Remove the towing hook and install the
cover after use.
8
8-31