Hyundai SX2 Owner's Manual page 425

• The vehicle encounters illuminant road
signs
• Intelligent Speed Limit Assist
incorrectly recognises numbers or
illustrations in the street signs or other
signs as the speed limit
• A road sign near the road you are
driving is detected
• The other traffic sign or signboards are
alongside the road sign
• Multiple signs are installed close
together
• The minimum speed limit sign is
misrecognised
• The minimum speed limit sign is on the
road
• The brightness changes suddenly, for
example when entering or exiting a
tunnel or passing under a bridge
• Headlights are not used or the
brightness of the headlights are weak at
night or in the tunnel
• Road signs are difficult to recognise
due to the reflection of sunlight, street
lights, or oncoming vehicles
• The navigation information or GPS
information contain errors.
• The driver does not follow the guide of
the navigation.
• The driver is driving on a new road that
is not in the navigation system yet.
• The field of view of the front view
camera is obstructed by sun glare
• Driving on a road that is sharply curved
or continuously curved
• Driving through speed bumps, or
driving up and down or left to right on
steep inclines
• The vehicle is shaking heavily
• Driving on a newly opened road
• The navigation software is being
updated whilst driving
• The navigation is restarted whilst
driving
WARNING
• Intelligent Speed Limit Assist is a
supplemental function that helps the
driver to comply with the speed limit on
the road, and may not display the
correct speed limit or control the
driving speed properly.
• Always set the vehicle speed to the
speed limit in your area.
• Intelligent Speed Limit Assist may not
operate for 15 seconds after the vehicle
is started, or the front camera is
initialized.
Information
For more information on the limitations of
the front view camera, refer to the
"Forward Collision-Avoidance Assist
(FCA) (Front view camera only)" section
in this chapter.
7
7-71